Cam Plus Clamps - Downloadable File
These clamps provide all the functionality of ordinary cam clamps with the addition of top-holding, and straight edge / stop functionality.
Included in this digital file are the SVG image, the Carbide Create file, and the gcode file suitable for milling 3/4” MDF.
If using the gcode file, the stock needs to be 5 inches wide (X) by 18 inches tall (Y) with 0,0 at the bottom left corner and the speed at ~15000rpm with a 1/4” end mill.
These clamps provide all the functionality of ordinary cam clamps with the addition of top-holding, and straight edge / stop functionality.
Included in this digital file are the SVG image, the Carbide Create file, and the gcode file suitable for milling 3/4” MDF.
If using the gcode file, the stock needs to be 5 inches wide (X) by 18 inches tall (Y) with 0,0 at the bottom left corner and the speed at ~15000rpm with a 1/4” end mill.
These clamps provide all the functionality of ordinary cam clamps with the addition of top-holding, and straight edge / stop functionality.
Included in this digital file are the SVG image, the Carbide Create file, and the gcode file suitable for milling 3/4” MDF.
If using the gcode file, the stock needs to be 5 inches wide (X) by 18 inches tall (Y) with 0,0 at the bottom left corner and the speed at ~15000rpm with a 1/4” end mill.
