Star Knob - 2"
This file contains the SVG, Carbide Create file and the gcode file for use with 1/2” MDF and a 1/4” end mill. Both the Carbide Create and gcode files are generated to mill 2 star knobs side by side. Keep this in mind if you intend to utilize them without modification.
The SVG file is provided for the 2” star knob with a 5/16” hole in the center. It does not contain the countersink pocket - this is added as an offset to the hole afterward if desired. Note : Although the SVG can be scaled, keep in mind this also scales the bolt hole so it may be necessary to adjust this hole after any scaling.
Actual size as posted : 2 1/64”
This file contains the SVG, Carbide Create file and the gcode file for use with 1/2” MDF and a 1/4” end mill. Both the Carbide Create and gcode files are generated to mill 2 star knobs side by side. Keep this in mind if you intend to utilize them without modification.
The SVG file is provided for the 2” star knob with a 5/16” hole in the center. It does not contain the countersink pocket - this is added as an offset to the hole afterward if desired. Note : Although the SVG can be scaled, keep in mind this also scales the bolt hole so it may be necessary to adjust this hole after any scaling.
Actual size as posted : 2 1/64”
This file contains the SVG, Carbide Create file and the gcode file for use with 1/2” MDF and a 1/4” end mill. Both the Carbide Create and gcode files are generated to mill 2 star knobs side by side. Keep this in mind if you intend to utilize them without modification.
The SVG file is provided for the 2” star knob with a 5/16” hole in the center. It does not contain the countersink pocket - this is added as an offset to the hole afterward if desired. Note : Although the SVG can be scaled, keep in mind this also scales the bolt hole so it may be necessary to adjust this hole after any scaling.
Actual size as posted : 2 1/64”
